Hollow Piston Cylinders
max. clamping force of 60 up to 104 kN
max. operating pressure 400 bar
Manual positioning of the element on the die clamping edge.
Clamping by the application of hydraulic pressure to the piston and unclamping by spring force.
By means of the T-bolt the die is clamped against the clamping surface of the press ram or bed.
Applications
- on press beds and rams
- on machines and equipments for clamping and locking
- when the available space is limited
- at environmental temperature up to 120° C
Special features
- optimum adaptation to the clamping surface by spherical disk
- T-bolt, secured against loosening
- ideal force transmission
- convenient and compact design with gripping surface
- clamping force from 60 kN up to 104 kN
- large clamping stroke
- no interfering edges when inserting the dies
- easy retrofit
- piston hardened and ground
- easy installation
- fully resilient stroke limitation
Versions
Hollow-piston cylinders with spherical disk for the adaptation to the clamping surface with adjusted and secured T-bolt (alternatively: without or with attached T-bolt)
Hollow-piston cylinders - ”L” design, without spherical disk for the adaptation to the clamping surface. T-bolt attached
Hollow-piston cylinders 3.2130 - Versions
Version with a total stroke of 20 mm
Optimum adaptation to varying heights of the clamping edges of dies by an increased total stroke of 20 mm (higher total stroke on request).
Technical design, clamping forces and dimensions are as indicated on data sheet 3.2130 for the standard design.
Version with variable clamping dimension
Freely adjustable and flexible adaptation to suit varying heights of clamping edges of the dies by quick and easy adjustment of the tie rod by means of a lock nut. The tie rod is inserted through the hollow-piston cylinder and adjusted to the the correct dimension by means of the lock nut.
In this version, the cylinder has a through hole instead of a thread. Technical design, clamping forces and dimensions are as shown on catalogue sheet 3.2130 for the standard design.
Item no. | CAD data | type | stroke [mm] | functioning | max. operating pressure [bar] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
Bracket with spacer bar
for T-slot 28 mm
*as per catalogue sheet WZ 3.1403
|
Item no.
|
CAD data
|
Description
Bracket mounted with spacer bars
for hollow piston cylinder
with connector block
for T-slot 28 mm
*as per catalogue sheet WZ 3.2130
|
Item no.
|
CAD data
|
Description
Bracket mounted with spacer bars
for hollow piston cylinder
without connector block
for T-slot 36 mm
*as per catalogue sheet WZ 3.2130
|
Item no.
|
CAD data
|
Description
Bracket mounted with spacer bars
for hollow piston cylinder
with connector block
for T-slot 36 mm
*as per catalogue sheet WZ 3.2130
|
Item no.
|
CAD data
|
Description
Connector block
with integrated check valve
*as per catalogue sheet WZ 3.2130
|
Item no.
|
Description
Connector block
with integrated check valve
*as per catalogue sheet WZ 3.2130
|
|
Item no.
|
CAD data
|
Description
Angle swivel joint
G1/4A - pipe Ø 8 mm
admissible continuous number of rotations 10 min-1
max. 500 bar, as per data sheet F9.280
|
Hollow-piston cylinders 3.2130
Use of hollow-piston cylinders in the press ram.
Hollow-piston cylinders 3.2130
Use of 32 hollow-piston cylinders in a press.
Reduction of set-up times by 30 %.
Hollow-piston cylinders 3.2130
Design "L"
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.