Sliding Clamps classic, clamping block

single acting, with spring return
max. operating pressure 400 bar
clamping force from 19 kN to 78 kN

Downloads

Catalogue sheet

EN DE ES FR IT

Operating instructions

Information Series

Description

Clamping block 3.2204 Sliding clamps classic

Manual positioning of the sliding clamp in the T-slots of the press ram or bed. Clamping on the die clamping edge by the application of hydraulic pressure to the piston and unclamping by spring force. The “classic” sliding clamp consists of a hydraulic clamping block which will be fixed with two screws to a T-slot adapter. The clamping block can also be directly screwed without T-slot adapter and can be ordered separately.

Applications

On press beds and rams
On machines and equipments for clamping and locking
When the available space is limited
At environmental temperatures up to max. 120°C

Special features

Ideal force transmission
Compact design
Clamping force from 19 kN up to 78 kN
Easy mounting suitable for large clamping edge tolerances
Easy retrofit
Die standardisation is not required (width and depth)

Products (4)

Number

Item no.	CAD data	type	type	stroke [mm]	functioning
Item no. 822021301	CAD data	type classic	type clamping block	stroke [mm] 8	functioning single acting with spring return	Properties
Item no. 822031301	CAD data	type classic	type clamping block	stroke [mm] 8	functioning single acting with spring return	Properties
Item no. 822041301	CAD data	type classic	type clamping block	stroke [mm] 8	functioning single acting with spring return	Properties
Item no. 822051301	CAD data	type classic	type clamping block	stroke [mm] 12	functioning single acting with spring return	Properties