Quick Die Change
Contact
Series
6.2210

Sliding Clamps, Mechanical

with integral high-pressure spindle
clamping force 40 and 80 kN
Sliding Clamps, Mechanical
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
6.2210 Sliding clamp, mechanical

Function

The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge.
Once the high-pressure spindle has been adjusted to suit the height of the clamping edge, the clamping force is built up by turning the hexagon nut in clockwise direction.
The clamping force achieved depends on the set tightening torque of the torque wrench.

 

Installation note

Before applying the tightening torque, the high-pressure spindle must be screwed against the clamping edge so that there is no play.
If the parts are not rigid, tighten the high-pressure spindle using the hexagon nut until there is no play.

Sliding clamp 6.2210, mechanical
Sliding clamp 6.2210, mechanical
Clamping block with integral high-pressure spindle

Function

The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge. The clamping force is built up by turning the hexagon nut in clockwise direction.
The clamping force achieved depends on the set tightening torque of the torque wrench.

 

Installation note 

The clamping blocks with integral high-pressure spindle can be mounted on spacer bars.

Products (5)
Loading…
type
max clamping force [kN]
clamping force display
without (5)
T-slot as per DIN 650
max. tightening torque [Nm]
Item no. CAD datatypemax clamping force [kN]clamping force displayT-slot as per DIN 650
Item no.
CAD data
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
18 or 22
Properties
Item no.
CAD data
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
18
Properties
Item no.
CAD data
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
22
Properties
Item no.
CAD data
type
sliding clamp
max clamping force [kN]
80
clamping force display
without
T-slot as per DIN 650
28
Properties
Item no.
CAD data
type
sliding clamp
max clamping force [kN]
80
clamping force display
without
T-slot as per DIN 650
28
Properties
Loading…
Item no.
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
18 or 22
max. tightening torque [Nm]
30
Item no.
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
18
max. tightening torque [Nm]
30
Item no.
type
sliding clamp
max clamping force [kN]
40
clamping force display
without
T-slot as per DIN 650
22
max. tightening torque [Nm]
30
Item no.
type
sliding clamp
max clamping force [kN]
80
clamping force display
without
T-slot as per DIN 650
28
max. tightening torque [Nm]
70
Item no.
type
sliding clamp
max clamping force [kN]
80
clamping force display
without
T-slot as per DIN 650
28
max. tightening torque [Nm]
70
Accessories (4)
Item no. CAD data Description
Item no.
CAD data
Description
Bracket to accommodate a sliding clamp without spacer bar for T-slot 18 mm *as per catalogue sheet WZ 3.2202
Item no.
CAD data
Description
Bracket to accommodate a sliding clamp without spacer bar for T-slot 22 mm *as per catalogue sheet WZ 3.2202
Item no.
CAD data
Description
Bracket to accommodate a sliding clamp without spacer bar for T-slot 28 mm *as per catalogue sheet WZ 3.2202
Item no.
CAD data
Description
Spacer bar for bracket sliding clamp for T-slot 18, 22 or 28 mm specify distance dimension “x” when ordering *as per catalogue sheet WZ 3.2202
Loading…
Application examples
Application example 1

Use of mechanical sliding clamps 6.2210 on a machine table.